IR-TEC America, Inc.

LRD‑609SA Series

Line Voltage SmartDIM Occupancy Sensor

The LRD‑609SA series of the TRANS‑PIR sensor family are two‑way IR remote programmable line voltage switching occupancy sensors with 0‑10V output for dimmable ballast or LED driver control. The sensor is capable of providing top‑notch energy efficient lighting control in multiple modes with fully programmable multi‑level high/low dim or SmartDIM continuous dimming control.

The LRD‑609SA series comes with a universal mounting design which provides complete installation flexibility with IP‑66 rating. Like all TRANS‑PIR sensors, the LRD‑609SA series are available with interchangeable lenses

 

 

  • Omni‑directional quad element infrared sensor
  • Digital data control ambient light sensor built-in
  • 2‑way IR remote programmable sensor setting
  • Hybrid switching for controlling loads with HIC
  • SmartDIM or multi-level high/low dim control
  • Remote programmable SmartDIM level setting
  • Up to 30 ft of remote programmable range
  • 120/277 VAC universal line voltage powered
  • Beeping or light flashing acknowledgement
  • IP‑66 rating universal mounting design
  • Available with interchangeable lens options
    Models Tech ALS Power Output Setting Wiring Switching Control
    LRD‑609SA b PIR 120/277 VAC SLV+AO Remote Cable Hybrid Multi‑mode, multi‑level SmartDIM control
     b - lens code
LEGENDS:
PIR - Passive infrared     SLV - Switched line voltage     AO - Analog output (0‑10V)
Lens Options Code Coverage  
Standard
Cone
A
Extra Wide
Cone
B
High Bay
Cone
C
Standard
Flat Round
D
Extra Wide
Dome
F
Aisle Way
Arch
(Not for IP-66)
G
High Bay
Dome
H
 
 

The SRP‑280 is a universal two‑way remote programming device designed to provide easy configuration of the remote programmable TRANS sensors from IR-TEC. This handheld programmer not only allows uploading new setting commands to the sensor, but also downloading the current settings of the installed TRANS remote sensor from the floor via intuitive keypad operation. Up to 4 EZ-set modes can be stored and recalled for quick setting of multiple sensors with identical parameters. 

Please note that the TRANS sensors could have different appearances but with same settings, or same appearance with different settings available. Through successful download, the available settings of the installed sensor will be shown on the LCD with its current settings. Non-applicable settings will display as N/A. The SRP-280 can also be used as a remote controller to manually turn on/off of the lighting controlled by the TRANS remote sensor.

Features
  • Exceptionally long range 2‑way communication
  • Intuitive instructions enable easy programming
  • Upload and Download status acknowledgement
  • Easy to duplicate one sensor setting to another
  • Set SmartDIM level to deliver optimum lighting
  • Capable of reading the current dim output level
  • Set ambient light level for daylight harvesting
  • Set high/low dim level output for bi‑level control
  • EZ‑SET profiles enable setting multiple sensors
  • Various time settings for burn-in test and operation
  • Rubber jacket provides superb drop protection
Product Information
LRD-609SA Datasheet
LRD-609SA Installation Instruction
Lens Options Datasheet
Lens Installation Instruction
SRP-280 Datasheet
SRP-280 Operation Instruction

  • Omni‑directional quad element infrared sensor
  • Digital data control ambient light sensor built-in
  • 2‑way IR remote programmable sensor setting
  • Hybrid switching for controlling loads with HIC
  • SmartDIM or multi-level high/low dim control
  • Remote programmable SmartDIM level setting
  • Up to 30 ft of remote programmable range
  • 120/277 VAC universal line voltage powered
  • Beeping or light flashing acknowledgement
  • IP‑66 rating universal mounting design
  • Available with interchangeable lens options

    Models Tech ALS Power Output Setting Wiring Switching Control
    LRD‑609SA b PIR 120/277 VAC SLV+AO Remote Cable Hybrid Multi‑mode, multi‑level SmartDIM control
     b - lens code
LEGENDS:
PIR - Passive infrared     SLV - Switched line voltage     AO - Analog output (0‑10V)

Lens Options Code Coverage  
Standard
Cone
A
Extra Wide
Cone
B
High Bay
Cone
C
Standard
Flat Round
D
Extra Wide
Dome
F
Aisle Way
Arch
(Not for IP-66)
G
High Bay
Dome
H
 
 

The SRP‑280 is a universal two‑way remote programming device designed to provide easy configuration of the remote programmable TRANS sensors from IR-TEC. This handheld programmer not only allows uploading new setting commands to the sensor, but also downloading the current settings of the installed TRANS remote sensor from the floor via intuitive keypad operation. Up to 4 EZ-set modes can be stored and recalled for quick setting of multiple sensors with identical parameters. 

Please note that the TRANS sensors could have different appearances but with same settings, or same appearance with different settings available. Through successful download, the available settings of the installed sensor will be shown on the LCD with its current settings. Non-applicable settings will display as N/A. The SRP-280 can also be used as a remote controller to manually turn on/off of the lighting controlled by the TRANS remote sensor.

Features
  • Exceptionally long range 2‑way communication
  • Intuitive instructions enable easy programming
  • Upload and Download status acknowledgement
  • Easy to duplicate one sensor setting to another
  • Set SmartDIM level to deliver optimum lighting
  • Capable of reading the current dim output level
  • Set ambient light level for daylight harvesting
  • Set high/low dim level output for bi‑level control
  • EZ‑SET profiles enable setting multiple sensors
  • Various time settings for burn-in test and operation
  • Rubber jacket provides superb drop protection

Product Information
LRD-609SA Datasheet
LRD-609SA Installation Instruction
Lens Options Datasheet
Lens Installation Instruction
SRP-280 Datasheet
SRP-280 Operation Instruction

Copyright ® IR-TEC America, Inc. All rights reserved.