Security & Automation Management System

 

  
HK-MC868 Main Controller
FEATURES
Supervised 868 MHz RF telecommunication
Off-site control via Internet, PSTN or GSM
HyperSecureLink PC upload & download
RF receiving signal strength level indication
Blue backlight 16 x 2 character LCD display
Hopping code remote control keyfob operation
Advanced radio jamming detection technology
288 fully programmable wireless sensor/zones
512 system event log with date and time stamp
Latchkey code reporting kid's arrival and leave
Instant event report to PSTN, pager, CMS, GSM
Hands-free, two-way voice communication HomeKeeper is an IP-based wired/wireless security and automation management system developed for home and business. This system redefines the standards for peace of mind and convenience by utilizing state-of-the-art microprocessor and RF telecommunication technologies to deliver many powerful features and functions for today's security & automation management.

In addition to the security protection, the HomeKeeper also provide home automation that enables property owner to remotely verify and control the status of connected lighting or appliance at anywhere, anytime.

Interactive programming interface offer easy installation and system setup to professional installer. Unique HyperSecureLink software can help installer to check system status without visiting the site.

 

 
Control up to 16 X-10 home automation module
Built-in voice dialer to phone and CMS data link
Secondary back up battery compartment
 
SPECIFICATIONS
Mains power
12VDC, 300 mA AC adaptor
Sensor zones
Wireless 288, wired 3
Radio frequency
868 MHz
RF codes
More than 4 billion in total
RF range
200 ft. or more at open field
RF receiver
Super heterodyne
Phone dial
Tone/pulse selectable
Phone numbers
10 PSTN, 1 pager, 2 CMS data links
Voice message
Total 120 sec. recording time
Alarm event log
Max. 512 with date & time
Memory back-up
At least 3 months after power stop
Operation code
14 codes each with max. 8 digits
Remote switching
Max. 16 units of X-10 power module
CMS protocol
Contact ID
Alarm output
3 A relay or 12 VDC, 200 mA selectable
Digital interface
RS-232 or 10M/100M Ethernet (optional)
Delay time
0 ~ 255 seconds programmable
Line-cut detection
16 ~ 24 V
Internal siren
110 dB @ 0.3 m
Operation temp.
-10°C~40°C
Storage temp.
-20°C~55°C
Humidity
10 ~ 95% RH
Dimension
248 x 180 x 52 mm
 
 

 
Company : IR-TEC International Ltd.
Address : 3F, 14 Lane 530, Chung Cheng N. Road
City : Sanchung, Taipei Hsien
Country : Taiwan
E-mail:sales@irtec.com
TEL : 886-2-2982 6332
FAX : 886-2-2983 3163
© 2008 IR-TEC International Ltd.