|
|||||
|
Ceiling
Mount Auto-Switch
FEATURES
Omni-directional,
dual element sensorAutomatic
temperature compensationSwitching
control up to 10 Amp loadSuperior
RFI/EMI immunity protectionAudible
Delay-End Warning enabledBuilt-in
CdS photocell light sensorAdjustable
light-on delay timeAdjustable
LUX level thresholdCeiling
recess mountable designVoltage
free relay contact outputSPECIFICATIONS| Power supply |
110
/ 230 VAC, 50/60 Hz
|
| Relay contact |
Max.
10 A, 250 VAC, no voltage
|
| Infrared
sensor |
Omni-directional,
dual element
|
| Delay time |
Approx.
8 sec. ~ 5 min. adjustable
|
| Lux adjustment |
Night-only
to 24 hours daytime operation
|
| Detection speed |
0.1~3.0
m/sec.
|
| Mounting height |
2.4
~ 4.2 m (8 ~ 14 ft)
|
| Mounting hole |
60
mm diameter
|
| Mounting pitch |
70~86
mm / 83.5 mm
|
| Op. temperature |
-20°C~50°C
(-4°F~122°F)
|
| Dimensions |
110
(dia.) x 60 mm (H)
|
It can be used to switch the light or other loads on and off by sensing the motion of people. Adjustable LUX and TIME allow user to set the switching control timing according to the ambient light level and light-on delay time. Audible delay-end warning can be enabled to indicate the approach of delay time end.
DETECTION
PATTERN
|
Company
: IR-TEC International Ltd.
Address : 3F, 14 Lane 530, Chung Cheng N. Road |
City : Sanchung, Taipei Hsien |
TEL : 886-2-2982 6332 |
|
©
2008 IR-TEC International Ltd.
|
||