SRP-280

TRANS Remote Programmer

The SRP-280 is a handheld programming tool for you to configure the settings of TRANS remote programmable sensors.

In addition, it can also be used as a remote to manually turn on/off the connected lighting.

 

 

 

  • Exceptionally long range 2‑way communication
  • Intuitive instructions enable easy programming
  • Upload and Download status acknowledgement
  • Easy to duplicate one sensor setting to another
  • Set SmartDIM level to deliver optimum lighting
  • Capable of reading the current dim output level
  • Set ambient light level for daylight harvesting
  • Set high/low dim level output for bi‑level control
  • EZ‑SET profiles enable setting multiple sensors
  • Various time settings for burn-in test and operation
  • Rubber jacket provides superb drop protection
TRANS Programmable Sensors
Device No. Model series Required SRP‑280 FW Version
006 HRD-600 3.7. and above
001 LRD‑509
LRD‑609
3.7 and above
029 LRD‑309S
LRD‑309SP
3.7 and above
011 LRS-509 3.7 and above
002 BRD-500
BRD-510
3.7 and above
035 BRD-310S
BRD-310SP
3.7 and above
003 BED-500
​BED-510
3.7 and above


Retrieve remote firmware info as below:

1. Press ENTER button on Main Menu to enter SETTING page.
2. Press DOWN button and navigate down until you find DEVICE INFO.
3. Press LEFT or RIGHT button and find REMOTE, and press ENTER.
4. Remote info will be shown.

Retrieve device no. info as below:

1. Press ENTER button on Main Menu to enter SETTING page.
2. Press DOWN button and navigate down until you find DEVICE INFO.
3. Press LEFT or RIGHT button and find DEVICE, and press enter.
4. Aim at the target device you wish to download info from, press ENTER and wait for screen to show DOWNLOAD OK.
5. Press ENTER to show data.

Product Information
SRP-280 Operation Instruction
TRANS Remote Programmer Update V4.1

  • Exceptionally long range 2‑way communication
  • Intuitive instructions enable easy programming
  • Upload and Download status acknowledgement
  • Easy to duplicate one sensor setting to another
  • Set SmartDIM level to deliver optimum lighting
  • Capable of reading the current dim output level
  • Set ambient light level for daylight harvesting
  • Set high/low dim level output for bi‑level control
  • EZ‑SET profiles enable setting multiple sensors
  • Various time settings for burn-in test and operation
  • Rubber jacket provides superb drop protection

TRANS Programmable Sensors
Device No. Model series Required SRP‑280 FW Version
006 HRD-600 3.7. and above
001 LRD‑509
LRD‑609
3.7 and above
029 LRD‑309S
LRD‑309SP
3.7 and above
011 LRS-509 3.7 and above
002 BRD-500
BRD-510
3.7 and above
035 BRD-310S
BRD-310SP
3.7 and above
003 BED-500
​BED-510
3.7 and above


Retrieve remote firmware info as below:

1. Press ENTER button on Main Menu to enter SETTING page.
2. Press DOWN button and navigate down until you find DEVICE INFO.
3. Press LEFT or RIGHT button and find REMOTE, and press ENTER.
4. Remote info will be shown.

Retrieve device no. info as below:

1. Press ENTER button on Main Menu to enter SETTING page.
2. Press DOWN button and navigate down until you find DEVICE INFO.
3. Press LEFT or RIGHT button and find DEVICE, and press enter.
4. Aim at the target device you wish to download info from, press ENTER and wait for screen to show DOWNLOAD OK.
5. Press ENTER to show data.

Product Information
SRP-280 Operation Instruction
TRANS Remote Programmer Update V4.1


2016-2023 Copyright © IR-TEC International Ltd. All rights reserved.
 Privacy Policy  |  Terms of Use  |  Disclaimer  |  Cookie Notice