OS‑NET Power Pack & Load Controller (ONP)
The OS‑NET Power Pack is an optional OS‑NET device.
The ONP is an OS‑NET enabled controller that can easily enable wireless smart lighting control with IR‑TEC's low voltage occupancy sensors. It can easily be configured to execute occupancy or vacancy sensing control to the connected light, or plug load control for codes compliance.
ON-PPU-301
Overview
The ON‑PPU‑301 is an optional device of IR‑TEC's OS‑NET wireless mesh network solution. This device is an OS‑NET enabled power pack and plug load controller featuring state‑of‑the‑art wireless mesh network capability for achieving top‑notch intelligent lighting control. This power pack not only supplies 24 VDC power for IR‑TEC's low voltage occupancy sensors, but also provides load switching up to 20A upon receiving control signals from wired sensors, or wireless commands from networked OS‑NET devices assigned with the same group. A unique radio command will be transmitted to other OS‑NET devices for executing coordinated group control when ON‑PPU‑301 receives control signal from a wired sensor.
This device can be attached to a junction box, cable tray, or fixture through a 1/2" knockout with the designed threaded nipple and locknut. Subject to the wiring connection and control setting, the ON‑PPU‑301 can be programmed to provide occupancy/vacancy sensing control to the connected light or plug load control for codes compliance. Numerous control settings, including burn‑in time, delay time, group/ungroup, lock/unlock…etc. can be intuitively configured via a 2‑way handheld OS‑NET remote programmer.
Features
Available Series
| Models | Power input | Wireless protocol | Radio frequency | DC Output | Control Signal | Max. load |
| ON‑PPU‑301 | 120/277 VAC | Modified Zigbee Light Link (ZLL) | 2.4 GHz | 24 VDC, 100mA max. | Dry contact or active low open collector | 20A |
ON-PPU-303
Overview
The ON-PPU-303 is an OS-NET enabled Demand Response Controller designed to provide demand response control (DRC) to comply with building energy code requirement. By connecting with an OS-NET network, the ON-PPU-303 will transmit a force-off command wirelessly to shut off the associated OS-NET controlled lighting upon receiving the DRC contact signal from control panel. After the DRC signal is disengaged, all OS-NET connected lighting will resume the original control.
This wireless control device can be attached to a junction box, cable tray, or fixture through a 1/2” knockout with the designed threaded nipple and locknut. Through intuitive operation on a 2-way IR remote programmer, SRP-281, the ON-PPU-303 can be set to control up to 4 groups.
With ON-PPU-303, demand response control can be easily achieved via OS-NET wireless smart lighting solution. Whether it is a new construction or retrofit project, OS-NET wireless smart lighting control solution will save you time and cost in installation, commissioning, and user adoption.
Features
Available Series
| Models | Power input | Wireless protocol | Radio frequency | DRC Signal |
| ON‑PPU‑303 | 120/277 VAC | Modified Zigbee Light Link (ZLL) | 2.4 GHz | Dry contact (NO) |
ON-PPU-304
Overview
The ON-PPU-304 is an OS-NET enabled override controller designed to provide force-on control wirelessly. Upon receiving the override signal from integrated BMS/LMS, the ON-PPU-304 will transmit a force-on wireless command to turn on all OS-NET controlled lighting. A pair of built-in 20A relay contacts will also be activated simultaneously. The force-on lighting will resume the original control after the override signal is disengaged and delay time of respective sensor elapsed.
This wireless control device can be attached to a junction box, cable tray, or fixture through a 1/2” knockout with the designed threaded nipple and locknut. Through easy and intuitive operation on a 2-way IR remote programmer, SRP-281, each ON-PPU-304 can be programmed to control up to 4 groups.
With ON-PPU-304, you can easily achieve force-on control while still providing occupancy sensing based control via OS-NET wireless smart lighting solution. Whether it is a new construction or retrofit project, OS-NET wireless smart lighting control solution will save you time and cost in installation, commissioning, and user adoption with ease.
Features
Available Series
| Models | Power input | Wireless protocol | Radio frequency | Control Signal | Max. load |
| ON‑PPU‑304 | 120/277 VAC | Modified Zigbee Light Link (ZLL) | 2.4 GHz | Dry contact or active low open collector | 20A |
ON-PPU-301
Overview
The ON‑PPU‑301 is an optional device of IR‑TEC's OS‑NET wireless mesh network solution. This device is an OS‑NET enabled power pack and plug load controller featuring state‑of‑the‑art wireless mesh network capability for achieving top‑notch intelligent lighting control. This power pack not only supplies 24 VDC power for IR‑TEC's low voltage occupancy sensors, but also provides load switching up to 20A upon receiving control signals from wired sensors, or wireless commands from networked OS‑NET devices assigned with the same group. A unique radio command will be transmitted to other OS‑NET devices for executing coordinated group control when ON‑PPU‑301 receives control signal from a wired sensor.
This device can be attached to a junction box, cable tray, or fixture through a 1/2" knockout with the designed threaded nipple and locknut. Subject to the wiring connection and control setting, the ON‑PPU‑301 can be programmed to provide occupancy/vacancy sensing control to the connected light or plug load control for codes compliance. Numerous control settings, including burn‑in time, delay time, group/ungroup, lock/unlock…etc. can be intuitively configured via a 2‑way handheld OS‑NET remote programmer.
Features
Available Series
| Models | Power input | Wireless protocol | Radio frequency | DC Output | Control Signal | Max. load |
| ON‑PPU‑301 | 120/277 VAC | Modified Zigbee Light Link (ZLL) | 2.4 GHz | 24 VDC, 100mA max. | Dry contact or active low open collector | 20A |
ON-PPU-303
Overview
The ON-PPU-303 is an OS-NET enabled Demand Response Controller designed to provide demand response control (DRC) to comply with building energy code requirement. By connecting with an OS-NET network, the ON-PPU-303 will transmit a force-off command wirelessly to shut off the associated OS-NET controlled lighting upon receiving the DRC contact signal from control panel. After the DRC signal is disengaged, all OS-NET connected lighting will resume the original control.
This wireless control device can be attached to a junction box, cable tray, or fixture through a 1/2” knockout with the designed threaded nipple and locknut. Through intuitive operation on a 2-way IR remote programmer, SRP-281, the ON-PPU-303 can be set to control up to 4 groups.
With ON-PPU-303, demand response control can be easily achieved via OS-NET wireless smart lighting solution. Whether it is a new construction or retrofit project, OS-NET wireless smart lighting control solution will save you time and cost in installation, commissioning, and user adoption.
Features
Available Series
| Models | Power input | Wireless protocol | Radio frequency | DRC Signal |
| ON‑PPU‑303 | 120/277 VAC | Modified Zigbee Light Link (ZLL) | 2.4 GHz | Dry contact (NO) |
ON-PPU-304
Overview
The ON-PPU-304 is an OS-NET enabled override controller designed to provide force-on control wirelessly. Upon receiving the override signal from integrated BMS/LMS, the ON-PPU-304 will transmit a force-on wireless command to turn on all OS-NET controlled lighting. A pair of built-in 20A relay contacts will also be activated simultaneously. The force-on lighting will resume the original control after the override signal is disengaged and delay time of respective sensor elapsed.
This wireless control device can be attached to a junction box, cable tray, or fixture through a 1/2” knockout with the designed threaded nipple and locknut. Through easy and intuitive operation on a 2-way IR remote programmer, SRP-281, each ON-PPU-304 can be programmed to control up to 4 groups.
With ON-PPU-304, you can easily achieve force-on control while still providing occupancy sensing based control via OS-NET wireless smart lighting solution. Whether it is a new construction or retrofit project, OS-NET wireless smart lighting control solution will save you time and cost in installation, commissioning, and user adoption with ease.
Features
Available Series
| Models | Power input | Wireless protocol | Radio frequency | Control Signal | Max. load |
| ON‑PPU‑304 | 120/277 VAC | Modified Zigbee Light Link (ZLL) | 2.4 GHz | Dry contact or active low open collector | 20A |
2016-2024 Copyright © IR-TEC International Ltd. All rights reserved.
Privacy Policy | Terms of Use | Disclaimer | Cookie Notice